LTM Series
| Velocity | max. 10 mm/s |
| Load capacity | max. 150 N |
| Actuating force | max. 60 N |
| Moment of tilt (Mx, My, z) | max. 15 Nm |
| Spindle pitch | 1 mm |
| repeatability (bidirectional) | <15 µm |
| positioning error | <25µm/100mm |
| yaw angle | <300 µrad |
| pitch angle | <250 µrad |
| vertical deviation | <5 µm |
| lateral deviation | <8 µm |
| motor voltage | max. 50 V |
| holding voltage | 3,2 V |
| motor current | max. 1,8 A per phase |
| steps/pulses per motor rev. | 200 in full-step mode |
| ambient operating temperature | +10 up to +50 °C |
| Range | 70mm, 95mm, 145mm, 195mm, 295mm |
| Guides | grinded finde thread spindle with free of play thrust bearing, rust-resistent, grinded Steel bearings |
| Drive | stepper motor |
| Material | high-strength aluminium special alloy |
| limit switch | high-strength limit switch (Hall-effect) |
| optional | z-assembly-set for LTM 80 |
| xy-assembly-set for LTM 80 |